Yes, we are still open and fully operational. Stay safe and stay healthy!

Mora Knife Blade No. 2/0 Carbon

M-191-2313

The 2/0 blade is high-carbon steel with no lamination, making it thinner than its laminated counterparts and thus better for slicing. The generous blade length and full-length tang would result in an excellent all-around utility knife, with a thin blade suited even for kitchen work.

Below are the detailed measurements of this blade:
  Overall Length: 6.5 inches (16.5 cm)
  Blade Length: 3 inches (7.6 cm)
  Blade Width: 0.6 inches (1.5 cm)
  Blade Thickness: 0.08 inches (2 mm)
  Blade Weight: 0.8 ounces (23 grams)
  Tang Length: 3.5 inches (8.9 cm)
  Tang Thickness: 0.08 inches (2 mm)
  Tang Width (At Blade): 0.4 inches (1 cm)
  Tang Width (At End): 0.09 inches (2.3 mm)
  Blade Material: carbon steel

Here are the fittings that this blade can be paired with, based on the sizes of the blade, tang, and slot. Any fitting labelled "might be too small/big" will still fit the blade, but might not be a good match depending on the style of knife that you're making.

  Bolster 13mm x 18mm Brass Shaped: slot is a bit too small, will need to be filed wider/longer
  Bolster 13mm x 18mm Nickel Shaped: slot is a bit too small, will need to be filed wider/longer
  Bolster 15mm x 22mm Brass Shaped: might be too big
  Bolster 15mm x 22mm Nickel Shaped: might be too big
  Bolster 16mm x 24mm Brass Shaped: might be too big
  Bolster 16mm x 24mm Nickel Shaped: might be too big
  Bolster 18mm x27mm Brass Shaped: might be too big
  Bolster 18mm x 27mm Nickel Shaped: might be too big
  Bolster 18mm x 35mm Brass Shaped: might be too big
  Bolster 18mm x 35mm Nickel Shaped: might be too big
  Bolster 19mm x 30mm Brass Shaped: might be too big
  Bolster 19mm x 30mm Nickel Shaped: might be too big
  Ferrule 15mm x 23mm Brass Shaped: might be too big
  Ferrule 15mm x 23mm Nickel Shaped: might be too big