Yes, we are still open and fully operational. Stay safe and stay healthy!

Mora Knife Blade No. 120 Laminated

M-191-2603

This is a high carbon laminated steel blade: with a center layer of high-carbon steel hardeened to 58-60 Rockwell, surrounded on each side by a layer of lower-carbon steel to add blade strength. This blade would make a good knife for detailed wood or bone carving.

Below are the detailed measurements of this blade:
  Overall Length: 6.5 inches (16.5 cm)
  Blade Length: 2.25 inches (5.7 cm)
  Blade Width: 0.56 inches (1.4 cm)
  Blade Thickness: 0.1 inches (2.5 mm)
  Blade Weight: 0.8 ounces (23 grams)
  Tang Length: 4.25 inches (10.8 cm)
  Tang Thickness: 0.1 inches (2.5 mm)
  Tang Width (At Blade): 0.46 inches (1.2 cm)
  Tang Width (At End): 0.13 inches (3.3 mm)
  Blade Material: laminated carbon steel

Here are the fittings that this blade can be paired with, based on the sizes of the blade, tang, and slot. Any fitting labelled "might be too small/big" will still fit the blade, but might not be a good match depending on the style of knife that you're making.

  Bolster 13mm x 18mm Brass Shaped: slot is a bit too small, will need to be filed wider/longer
  Bolster 13mm x 18mm Nickel Shaped: slot is a bit too small, will need to be filed wider/longer
  Bolster 15mm x 22mm Brass Shaped: might be too big
  Bolster 15mm x 22mm Nickel Shaped: might be too big
  Bolster 16mm x 24mm Brass Shaped: might be too big
  Bolster 16mm x 24mm Nickel Shaped: might be too big
  Bolster 18mm x 27mm Nickel Shaped: might be too big
  Bolster 18mm x 35mm Brass Shaped: might be too big
  Bolster 18mm x 35mm Nickel Shaped: might be too big
  Ferrule 15mm x 23mm Brass Shaped: might be too big
  Ferrule 15mm x 23mm Nickel Shaped: might be too big