We offer wholesale discounts on all of our products. E-mail us for details.

Laurin Little Leuku Stainless 90mm with ricasso Blade

90littleleukustainlesswithricasso

Click here for more details on Laurin blades and fittings!

This blade would make a smaller leuku knife, which is typically used for heavier-duty chores or skinning. The ricasso (the squared portion ar the base of the blade) is not traditional, but does make it easier to get a tight fit between the base of the blade and the bolster/guard, which is important because you don't want any moisture getting inside your handle.

Below are the detailed measurements of this blade:
  Overall Length: 8.625 inches (21.9 cm)
  Blade Length: 3.5 inches (8.9 cm)
  Blade Width: 1.03 inches (2.6 cm)
  Blade Thickness: 0.11 inches (2.8 mm)
  Ricasso Width: 1.05 inches (2.7 cm)
  Ricasso Thickness: 0.11 inches (2.8 mm)
  Blade Weight: 2.5 ounces (71 grams)
  Tang Length: 5.125 inches (13 cm)
  Tang Thickness: 0.11 inches (2.8 mm)
  Tang Width (At Blade): 0.62 inches (1.6 cm)
  Tang Width (At End): 0.16 inches (4.1 mm)
  Blade Material: stainless

Here are the fittings that this blade can be paired with, based on the sizes of the blade, tang, and slot. Any fitting labelled "might be too small/big" will still fit the blade, but might not be a good match depending on the style of knife that you're making.

  Bolster 18mm x 27mm Brass Straight: might be too small
  Bolster 18mm x 27mm Nickel Straight: might be too small
  Bolster 19mm x 30mm Brass Straight: slot is a bit too small, will need to be filed wider/longer
  Bolster 19mm x 30mm Nickel Straight: slot is a bit too small, will need to be filed wider/longer
  Bolster 18mm x 35mm Brass Straight: might be too big
  Bolster 18mm x 35mm Nickel Straight: might be too big
  Bolster 21mm x 32mm Brass Straight: might be too big
  Bolster 21mm x 32mm Nickel Straight: might be too big
  Bolster 24mm x 44mm Brass Straight: might be too big
  Bolster 24mm x 44mm Nickel Straight: might be too big
  Ferrule 18mm x 32mm Brass Straight: might be too big
  Ferrule 18mm x 32mm Nickel Straight: might be too big
  Ferrule 21mm x 39mm Brass Straight: might be too big
  Ferrule 21mm x 39mm Nickel Straight: might be too big

Next Previous