Yes, we are still open and fully operational. Stay safe and stay healthy!

Laurin Fillet 160mm Blade

fillet160

This blade will make an excellent fillet knife.

Below are the detailed measurements of this blade:
  Overall Length: 11 inches (27.9 cm)
  Blade Length: 6.25 inches (15.9 cm)
  Blade Width: 0.75 inches (1.9 cm)
  Blade Thickness: 0.05 inches (1.3 mm)
  Blade Weight: 0.7 ounces (20 grams)
  Tang Length: 4.75 inches (12.1 cm)
  Tang Thickness: 0.05 inches (1.3 mm)
  Tang Width (At Blade): 0.52 inches (1.3 cm)
  Tang Width (At End): 0.1 inches (2.5 mm)
  Blade Material: stainless

Here are the fittings that this blade can be paired with, based on the sizes of the blade, tang, and slot. Any fitting labelled "might be too small/big" will still fit the blade, but might not be a good match depending on the style of knife that you're making.

  Bolster 15mm x 22mm Brass Shaped: slot is a bit too small, will need to be filed wider/longer
  Bolster 15mm x 22mm Nickel Shaped: slot is a bit too small, will need to be filed wider/longer
  Ferrule 15mm x 23mm Brass Fillet: slot is a bit too small, will need to be filed wider/longer
  Ferrule 15mm x 23mm Brass Shaped: slot is a bit too small, will need to be filed wider/longer
  Ferrule 15mm x 23mm Nickel Fillet: slot is a bit too small, will need to be filed wider/longer
  Ferrule 15mm x 23mm Nickel Shaped: slot is a bit too small, will need to be filed wider/longer
  Bolster 16mm x 24mm Brass Fillet: **BEST FIT**
  Bolster 16mm x 24mm Nickel Fillet: **BEST FIT**
  Bolster 18mm x27mm Brass Shaped: might be too big
  Bolster 18mm x 27mm Nickel Shaped: might be too big
  Bolster 18mm x 35mm Brass Shaped: might be too big
  Bolster 18mm x 35mm Nickel Shaped: might be too big
  Bolster 19mm x 30mm Brass Shaped: might be too big
  Bolster 19mm x 30mm Nickel Shaped: might be too big
  Bolster 16mm x 24mm Brass Shaped: slot too wide, will need extra glue or solder
  Bolster 16mm x 24mm Nickel Shaped: slot too wide, will need extra glue or solder